Installation instructions, Gas & electric dryer – Kenmore 417.64182300 User Manual
Page 8
For your safety the information
in this manual must be followed to minimize the
risk of fire or explosion or to prevent property
damage, personal injury or loss of life.
- Do not store or use gasoline or other
flammable vapors and liquid in the vicinity of
this or any other machine.
- WHAT TO DO IF YOU SMELL GAS
· Do not try to light any machine.
· Do not touch any electrical switch; do not
use any phone in your building.
· Clear the room, building or area of all
occupants.
· Immediately call your gas supplier from a
neighbor’s phone. Follow the gas
supplier's instructions.
· If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
Contents
SUBJECT
PAGE
Pre-Installation Requirements
2
Electrical Requirements
2
Exhaust System Requirements
2-3
Gas Supply Requirements
3
Location of Your Dryer
4
Rough-In Dimensions
5
Unpacking
5
Reversing Door Swing
5
Electrical Installation
6
Grounding Requirements
6
Electrical Connections—3-wire
7
Electrical Connections—4-wire
7
Installation
8
Replacement Parts
8
Lint Blade Retaining Pin Location
8
Printed in U.S.A.
P/N 134313400 (0309)
Installation
Instructions
Gas & Electric
Dryer
Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the
dryer is installed correctly and safely. Leave these instructions near the Dryer after installation for future reference.
NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Electrical Code, ANSI/NFPA 70.
NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Fuel Gas Code ANSI Z223.1.
Sears, Roebuck and Co.,
Hoffman Estates, IL 60179 U.S.A.