Kenwood eXcelon KDC-X769 User Manual
Page 16
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
• A title can't be attached to a MD.
• Refer to the
"DNPS" or "SNPS".
2
Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character position
Press the [
4] or [¢] button.
4
Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Button
Alphabet (Upper case/ Lower case)
[2] ("CAPS")
Numbers and symbols
[3] ("NUM")
Special characters (Accent characters)
[4] ("CHAR")
5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character
Button
Times pressed
"D"
[3]
1
"A"
[2]
1
"N"
[6]
2
"C"
[2]
3
"E"
[3]
2
6
Repeat steps 3 through 5 and enter the name.
Station/Disc Naming (SNPS/DNPS)
Function of the KDC-V7022
You can set the display to a desired color.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to
2
Enter display control mode
Press the [3] ("DISP") button.
3
Quick call up the preset color
Press the [4] ("CLR") button.
Each time the button is pressed the Color mode switches as
shown below.
Color mode
Display
The color changes in sequence.
"COL Scan"
Preset color (Silky White)
"COL S.White"
Preset color (Red)
"COL Red"
Preset color (Blue)
"COL Blue"
Preset color (Blue Green)
"COL B.Green"
Original color
"COL User"
The color changes according
to the selected source.
"COL SRC"
The color changes every 6 hours.
"COL Time"
The color continues to change gradually
Hold down on the [
4] or [¢] button.
"COL User" is displayed.
Release your finger at the color you want.
4
Exit display control mode
Press the [RTN] button.
Illumination Color Setting
General features
— 16 —
English
KDC-MP822_U.S 02.12.11 11:23 AM Page 16