Operating instructions – continued, Gfci instructions – Karcher K 3.97 M User Manual
Page 6
6
OPERATING INSTRUCTIONS – continued
Step 5
Step 5
Step 5
Step 5
Step 5
Turn Quattro Nozzle to desired setting position. Match symbols above.
Step 6
Step 6
Step 6
Step 6
Step 6
Turn on the pressure washer. The
motor starts only if the trigger of the gun is
pulled and shuts off when the trigger is
released.
WARNING
RISK OF INJECTION OR INJURY-DO
NOT DIRECT DISCHARGE STREAM AT
PERSONS.
TO AVOID SERIOUS INJURY, NEVER
POINT SPRAY NOZZLE AT YOURSELF,
OTHER PERSONS OR ANIMALS.
High pressure
pencil jet
cleaning
High pressure
fan jet cleaning
Rotating jet for
maximum dirt
cutting action
Low pressure
fan jet for
detergent
injection
GFCI INSTRUCTIONS
Step 1
Step 1
Step 1
Step 1
Step 1
Plug the Ground
Fault Circuit Interrupter
(GFCI) into a working outlet.
Step 2
Step 2
Step 2
Step 2
Step 2
If the GFCI light
glows, press the “Test”
button until the light goes
out.
Step 3
Step 3
Step 3
Step 3
Step 3
Press the
“Reset” button to restore
power to the washer.
- HD 4000 C (33 pages)
- T350 T-Racer (8 pages)
- G2600XH (40 pages)
- K 5.690 (17 pages)
- HD 3000 DH (12 pages)
- T-RACER T 200 (12 pages)
- K 2.55 (44 pages)
- K9000G (12 pages)
- 460 (12 pages)
- K 520 (12 pages)
- 1750 (12 pages)
- K7000G (7 pages)
- K 2.29 M (12 pages)
- K 3.99M (48 pages)
- K 5.93 (16 pages)
- K 3.79 M (12 pages)
- K 2.080 (12 pages)
- KM 85/50 W B (17 pages)
- K 2.7 (16 pages)
- K 5.68 M (52 pages)
- G 2300 LT (7 pages)
- K 5000 G (12 pages)
- G 2401 OH (40 pages)
- K 4.93 M (12 pages)
- HDS 2000 (16 pages)
- PUZZI 300 (15 pages)
- T-Racer (8 pages)
- K 6.450 (16 pages)
- K 2.54 M (12 pages)
- K 2.27 (48 pages)
- K 2.16 (48 pages)
- K 6.85 M (16 pages)
- K 2500 HK (12 pages)
- K 2.300 (16 pages)
- K 2.21 (48 pages)
- G 2800 OH (40 pages)
- G 2600 VC (46 pages)
- K 5.540 (64 pages)
- K 3.91 M (52 pages)
- G2800XC (40 pages)
- K 3.92 M (48 pages)
- K 360 M (12 pages)
- K 370 M (12 pages)
- K 2.360 (52 pages)
- KB 3.99 M (12 pages)