Karcher K 3.97 M - Manual (Page 5)

5
ASSEMBLY INSTRUCTIONS – continued
OPERATING INSTRUCTIONS
Step 4 Step 4 Step 4 Step 4 Step 4
Pull out the locking slide from
the right side of the trigger
gun handle, and insert the
small end of the high
pressure hose into place.
Push the locking slide back
into the trigger gun to lock the
hose in position.
Step 5 Step 5 Step 5 Step 5 Step 5
Insert the Spray Wand
Extension into the trigger gun.
Press in against the spring tension and twist into the
lock position. Turn the Spray Wand Extension Collar
clock-wise until tight. Note: spray wand extension must
be attached to use accessories.
Step 6 Step 6 Step 6 Step 6 Step 6
Attach quattro nozzle for four different
spray settings.
Step 1 Step 1 Step 1 Step 1 Step 1
Connect the high pressure hose to the high
pressure outlet.
Step 2 Step 2 Step 2 Step 2 Step 2
Connect the garden hose to the water inlet.
Step 3 Step 3 Step 3 Step 3 Step 3
Connect garden hose to the cold water
source and turn water on completely.
Step 4 Step 4 Step 4 Step 4 Step 4
Plug the power cord into the power outlet.
Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from
the spray nozzle.