Kyocera Deco E1000 - Manual (Page 59)

User Guide 51
Emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
1.
Select Menu > Settings > Security .
2. Enter your four-digit lock code.
3. Select Emergency Numbers .
4. Select an Unassigned slot.
5. Enter the number and select Done .
You can view these numbers only when they’re
being entered for the first time. To make a call to
an emergency number from a locked phone, you
must dial the number (including area code)
exactly as it was stored in Emergency Numbers.
Erase contacts
You can erase all entries from your
Contacts directory.
1.
Select Menu > Settings > Security .
2. Enter your four-digit lock code.
3. Select Erase Contacts and one of
the following:
–
No exits without erasing contacts.
– Yes erases all contacts. A confirmation
prompt appears to verify your decision.
4. Select Yes to confirm.
New Lock Code
Change your lock code from the default provided
by the service provider. The lock code is typically
0000 or the last 4 digits of your phone number.
1.
Select Menu > Settings > Security .
2. Enter your four-digit lock code.
3. Select Lock Code .
4. A confirmation prompt appears. Select Yes .
5. Enter a new four-digit code
6. Re-enter your new lock code
The lock is now changed
Accessories
This section describes settings that affect
accessories you use with your phone.
Headset sounds
When a headset is attached to your phone, the
ringer can be played through the headset or
phone speaker.
Select
Menu > Settings > Accessories >
Headset Sounds and one of the following.
• Out of phone rings from the phone speaker.
• Out of headset rings from the headset.
82-G1877-1EN.book Page 51 Thursday, August 23, 2007 10:53 AM