Kyocera Deco E1000 - Manual (Page 56)

48 Network
Phone information
You can access information regarding your
phone. Select
Menu > Settings > My Phone >
Phone Info and one of the following:
• Build Info shows specific software and
hardware information.
• Icon Keys shows the icons used by
your phone.
Network
Data and fax calls
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
Note: To purchase a cable, visit
www.kyocera-wireless.com/store .
To enable data/fax mode, select Menu >
Settings > Network > Data/Fax Calls and of
the following:
•
Voice Only turns data/fax mode off.
• Fax, next call or Data, next call sets the
phone to data/fax mode for the next incoming
call or the next ten minutes.
• Fax, until off or Data, until off sets the
phone to data/fax mode until the phone is
turned off.
Privacy alert
You set your phone to alert you when enhanced
digital CDMA privacy is lost or regained. Select
Menu > Settings > Network > Privacy Alert >
Enabled .
Voice privacy
Set your phone to use enhanced digital CDMA
privacy. Select
Menu > Settings > Network >
Voice Privacy > Enhanced .
Data setup
Set your phone’s connection type for data
applications. Select
Menu > Settings >
Network > Data Setup and one of the following:
• Automatic select the best connection type
based on your service.
• QNC Only allows only standard circuit-
switched calls.
• 1XRTT Only allows the use of high-speed
packet data.
User name
Allows you to set a user name and password if
your phone is data enabled.
1.
Select Menu > Settings > Network >
User Name .
2. Enter or modify your user name. Select Next .
3. Enter or modify your password. Select Done .
82-G1877-1EN.book Page 48 Thursday, August 23, 2007 10:53 AM