Kodak DX3500 - Manual (Page 54)

46
Chapter 7
Installing the Dock Insert
KODAK DX-series cameras are packaged with a Dock insert, which is used to
custom-fit the camera to the Camera Dock.
1 Place the front tabs on the insert into the
slots in the Camera Dock cavity.
2 Fit the insert down into the cavity and snap
the insert into place.
Connecting the Camera Dock
Connect the Camera Dock to your computer and to an external power source.
You will need the USB cable that is included with your camera, and the AC
adapter that is included with the Camera Dock.
1 Plug the labeled ( ) end of the USB cable
into the labeled USB port on your computer.
If the computer port is not labeled, see your
computer User’s Guide.
2 Plug the other end of the USB cable into the
labeled USB connector on the back of the
Camera Dock.
3 Plug the AC adapter into the back of the
Camera Dock and into a power outlet.
Do not connect to the computer if the camera is in the Camera Dock.
Some AC adapters may look different from the one pictured, or may be
supplied with additional plugs. Use the plug that accommodates your type of
power outlet.
Leave the Camera Dock connected to the computer for easy access for
transferring pictures, charging the Battery Pack, and providing power to the
camera.
1
2
3