Konica Minolta Minolta RIVA ZOOM 70 - Manual (Page 33)

33
ABOUT FULL-AUTO PROGRAM
Full-auto program completely automates the picture-
taking process. If the position of the mode dial is
changed, the following are reset:
Exposure compensation (p. 42)
Off Multiple exposure (p. 53)
Autoflash Flash mode (p. 24)
Wide focus frame Focus area (p. 11)
Auto Autofocus mode (p. 56)
Single-frame advance Drive mode (p. 50)
14-segment Metering mode (p. 58)
Off Exposure bracketing (p. 54)
Off Wireless / Remote flash (p. 60)
0.0
If the required exposure is beyond the
shutter speed and aperture range, the
shutter speed and aperture displays blink
on the data panel and in the viewfinder.
In bright conditions, use a neutral density filter on the lens, load a
slower film, or, if using artificial lights, reduce the intensity of the
illumination. In dark conditions, use the built-in flash or load a faster
film.
When the mode dial is turned to the full-auto program or subject-program
positions, the program, aperture-priority, shutter-priority, and manual
exposure modes are also reset.
Camera Notes