Konica Minolta Minolta RIVA ZOOM 70 - Manual (Page 25)

ISO400
25
The viewfinder flash signal indicate the status of the flash.
If the flash signal does not blink after taking the picture, the subject
was not within the flash range.
FLASH SIGNALS
ISO 100
f/4.0
f/5.6 1.0 ~ 4.0m / 3.3 ~ 13.1 ft.
1.0 ~ 2.8m / 3.3 ~ 9.2 ft.
1.0 ~ 9.0m / 3.3 ~ 29.6 ft.
1.0 ~ 8.0m / 3.3 ~ 26.2 ft.
1.0 ~ 5.6m / 3.3 ~ 18.4 ft.
The range of the built-in flash depends on the speed of the film and
the aperture used for the exposure. The subject must be within the
flash range specified in the table below to be correctly exposed.
f/3.5 1.0 ~ 4.5m / 3.3 ~ 14.8 ft.
FLASH RANGE
Aperture
Signal steady - flash charged and ready to fire.
Signal blinking - flash output was sufficient for exposure.
With full-auto program, program, and
subject programs, fill flash can be
used with specific single exposures.
Press and hold the flash-mode
button while pressing the shutter-
release button to make the
exposure; the flash pops up
automatically.
Camera Notes
1.0 ~ 11m / 3.3 ~ 36 ft. f/2.8 1.0 ~ 5.6m / 3.3 ~ 18.4 ft.