Kenwood KIV-BT900 - Manual (Page 3)

English | 3
Before use
2WARNING
To prevent injury or fire, take the
following precautions:
• Do not watch or fix your eyes on the
unit’s display when you are driving for any
extended period.
• To prevent a short circuit, never put or
leave any metallic objects (such as coins
or metal tools) inside the unit.
How to reset your unit
If this unit or the connected unit (auto
disc changer, etc.) fails to operate properly,
reset the unit. While pressing the [Volume]
knob and the [MENU] button, press the
[SRC] button for at least 3 seconds. The unit
returns to factory settings when the reset
operation is complete.
SRC MENU Volume
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with a
neutral cleaner, then wipe it again with a
clean soft dry cloth.
Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping
the faceplate with a hard cloth or using a
volatile liquid such as thinner or alcohol
may scratch the surface or erase characters.
Notes
• If you experience problems during
installation, consult your Kenwood dealer.
• When you purchase optional accessories,
check with your Kenwood dealer to make
sure that they work with your model and
in your area.
• Characters that conform to ISO 8859-1
can be displayed.
• The RDS or RBDS feature won’t work
where the service is not supported by any
broadcasting station.
• The illustrations of the display and the
panel appearing in this manual are
examples used to explain more clearly
how the controls are used. Therefore,
what appears on the display in the
illustrations may differ from what appears
on the display on the actual equipment,
and some of the illustrations on the
display may be inapplicable.