Connecting wires to terminals – Kenwood KIV-BT900 User Manual
Page 12

–
+
iP
od
A
UDIO IN
iP
od
VIDEO IN
iP
od
A
UDIO OUT
iP
od
VIDEO OUT
iPod
VIDEO OUT
iPod
AUDIO OUT
12 | Quick Start Guide
Connecting Wires to Terminals
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
⁄
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic part
of the vehicle.
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black)
· (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse
box
Battery
Microphone
(Accessory
7)
(KIV-BT900 only)
Microphone input
(KIV-BT900 only)
USB connector (1m)
⁄
• Speaker Impedance
: 4 – 8 Ω
• USB terminal Maximum
Supply current
: 500 mA
For the sake of safety, be sure to connect the parking sensor.
⁄
Connect to the vehicle’s parking brake detection switch harness.
iPod visual output
(Yellow)
iPod audio output
(Left: White, Right: Red)
Parking sensor wire (Light Green)
Parking sensor wire Junction cable
(Light Green) (Accessory
3)
iPod cable
(Accessory
4)
iPod
(commercially
available)
USB device (commercially available)