Menu operation – Kenwood KDC-W237S User Manual
Page 10
10
|
KDC-W237S
Menu Operation
Menu System
Setting various functions.
1
Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
“MENU” is displayed.
2
Select the menu item
Press the top or bottom side of the Control
knob.
Display
Setting
Setting overview
Source
“CLK ADJ”
Refer to
page 10
Sets the clock.
“SYNC”
ON*/OFF
Synchronizing the RDS station
time data and this unit’s clock.
“DIM”
ON/OFF*
Adjusts the brightness of
the display according to the
surrounding illumination.
“SWPRE”
R*/ SW
Sets the preout output.
“SPRM”
ON*/OFF
Turns ON/OFF the Supreme
function.
“NEWS”
OFF*
– 90M
Turns ON/OFF the News Bulletin
Automatic Reception function
and sets the news bulletin
interrupt disabled time.
“LO.S”
ON/OFF*
Only stations whose reception is
good are searched in auto seek
tuning.
“AUTO1”/
”AUTO2”/
”MANU”
“AUTO1”*/
”AUTO2”/
”MANU”
Selects the tuning mode of
the radio.
“AF”
ON*/OFF
When station reception is poor,
automatically switches to the
station that is broadcasting the
same program over the same RDS
network.
“REG”
ON*/OFF
Sets whether to switch to the
station only in the specific region
using the “AF” control.
“ATPS”
ON*/OFF
When traffic information station
reception is poor, automatically
searches for a station that can be
received better.
“MONO”
ON/OFF*
Receives a stereo broadcast in the
mono mode.
“NAME SET” Refer to
page 11
Sets the display when switched
to AUX source.
“SCL”
AUTO/
MANU*
Specifies whether the text is
scrolled automatically.
“AUX”
OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
Display
Setting
Setting overview
Source
“OFF”
OFF – 60M Turns off the power when the
preset time has lapsed in the
Standby mode.
“CD READ”
1*/2
Sets the CD read mode.
“DEMO”
Refer to
page 11
Specifies whether to enable
demonstration.
* Factory setting
: Can be set in standby state.
: Can be set in other than standby state.
: Can be set while Audio file source.
: Can be set while Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Refer to the
menu items.
3
Set the menu item
Press the right or left side of the Control knob.
4
Exit Menu mode
Press the [B.BOOST] button.
Manual Clock Adjustment
1
Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
“MENU” is displayed.
2
Select Clock Adjustment mode
Press the top or bottom side of the Control
knob.
Select the “CLK ADJ” display.
3
Enter Clock Adjust mode
Press the center of the Control knob for at least
1 second.
The clock display blinks.
4
Adjust the hours
Press the top or bottom side of the Control
knob.
Adjust the minutes
Press the right or left side of the Control knob.
5
Exit Clock adjustment mode
Press the [B.BOOST] button.