Kyocera Mita FS-8000CD - Manual (Page 38)

36
Cleaning the Printer
The following parts must be cleaned each time the
toner container is replaced:
•
Registration roller
• Belts
• Separation charger
• Main charger wire
• Main charger grid
These parts are explained in the following sections. In
addition to this, it is recommended that these three
parts are cleaned periodically at least once a month.
Cleaning the Paper Feed Unit
Print problems such as soiling of the reverse side of
printed pages may occur if the paper feed unit becomes
dirty. To clean the paper feed unit:
Open the front cover. Pull the paper feed unit out by its
handle.
FS8000QR.book Page 36 Tuesday, December 25, 2001 10:47 AM