Setting the clock – Kompernass BALANCE KH 8090 User Manual

Page 9

4. Setting the clock

ᕣ This is necessary if you wish to save your measure-

ments and evaluate them. Press the

MODE

button .

ᕤ The display shows the month, day, and time. You can

jump from one position to the next by pressing the
button again. The currently selected position flashes.

ᕥ Press the

SET

button to change the value at the

flashing position. For the clock time, the second part
of the day is indicated by a small letter “P” (for PM)
under the colon character.

The settings are stored when the last position is completed.

ᕤ

ᕣ

ᕥ