Care and cleaning – Kompernass BALANCE KH 8090 User Manual
Page 16
16
c) Erasing stored measurements
Once all the memory locations are occupied, the
appliance automatically overwrites the oldest measure-
ment. It is therefore not absolutely necessary to erase
memory locations. However, you can erase all the
memories completely by ...
•
taking out the batteries and inserting them again after
a few seconds.
Afterwards, using the
MEMORY
button, check whether
any of the memory locations are still occupied, and if so,
repeat the process.
8. Care and cleaning
•
Carefully clean the equipment and pressure sleeve
using a slightly damp cloth only.
•
Do not use cleaning agents or solvents.
•
Do not, in any circumstances, immerse the appliance
in water, as this will penetrate through to the inside.
This would cause damage to the appliance.