Kompernass BALANCE KH 8090 - Manual (Page 15)

15
7. Saving your measurements
The appliance has three memory blocks (numbered 1 to
3), each with 30 memory locations. It can therefore store
up to 30 measurements for 3 persons, or up to 90
measurements for one person.
a) How to save a measurement
ᕡ First select 'your own' memory block. To do this, press
the SET button as often as necessary until the display
shows the number of 'your' memory memory block
(one of block numbers 1 to 3).
ᕢ If you carry out the measurement process now, as
described in Chapters 5 and 6, the result is stored in
the selected memory block.
b) Recalling a previous measurement
ᕡ First select 'your own' memory block. To do this, press
the SET button repeatedly until the display shows the
number of 'your' memory memory block (one of block
numbers 1 to 3).
ᕣ Using the
MEMORY button, you can now leaf through
all saved measurements. The date and time of
measurement is indicated for each.