beautypg.com

Krups Orchestro 889 User Manual

Page 22

background image

22

■ Turn the selector knob for steam/hot water to

the

position (32).

The de-scaling solution will be pumped
intermittently through the steam nozzle.

When the steam system is de-scaled, the
“empty spent coffee holder” indicator will glow.

■ Take out and empty the drawer with the spent

coffee holder. Then replace these parts.

The “ON/OFF” and “steam” indicators will
blink.

■ Turn the selector knob for steam/hot water to the

position.

The de-scaling process will now continue and the de-scaling solution will
run intermittently into the drawer.

■ When the “fill water tank” and “empty spent coffee holder” glow, rinse

out the water tank thoroughly. Fill the tank with fresh water (at least 1 litre -
a good half tankful) and return it to the appliance.

■ Remove the drawer, empty it and return it to the appliance.

The “ON/OFF” and “steam” indicators will blink.

■ Place a sufficiently large receptacle (at least 300 ml capacity) below the

steam nozzle (32).

■ Turn the selector knob for steam/hot water to the

position (32).

The water will be pumped intermittently through the steam nozzle.

■ When the “empty spent coffee holder” indicator glows, take out and

empty the drawer with the spent coffee holder. Then replace these parts.

The “ON/OFF” and “steam” indicators will blink.

■ Turn the selector knob for steam/hot water to the

position. The rinsing

procedure will continue and the water will run intermittently into the
drawer.

■ When the rinsing operation is completed, the “empty spent coffee holder”

indicator will glow. Empty the drawer and replace it.

The “ON/OFF” and “rinse” indicators will glow.

■ Place a receptacle beneath the espresso delivery pipe and press the

key.

After the rinsing operation, all indicators will be extinguished.

■ Remove the drawer with the base grid and spent coffee holder. Clean these

parts with warm water and washing-up liquid. Then dry them thoroughly
and return them to the appliance.

The lime-scale removal programme takes about 25 minutes to complete.

appliance

indicator(s)

32