Kodak 8500 - Manual (Page 4)

-4-
Send the Calibration Table to the Printer:
The last step in downloading the default printer calibration table to the printer involves sending
the table to the printer. This is done by clicking on the Send button as shown in Figure 5.
Figure 5
After clicking on the Send button, a dialog box will appear as shown in Figure 6, confirming
your decision to send the table to the selected printer. Click on the Send button to send the table.
A dialog box will appear confirming that the table was sent to the printer as shown in Figure 7.
Click on the OK button to dismiss the dialog box.
Figure 6 Figure 7