Kenwood KMD-673R User Manual

Page 23

With automatic time adjustment, you can set the clock time
automatically according to time data sent from RDS stations
(after receiving RDS signals for several minutes). You can also
set the time manually if the automatic time adjustment
function is turned off. The factory default is automatic time
adjustment.

Display and setting:

"SYNC ON" : Automatic time adjustment
"SYNC OFF" : Manual time adjustment

Adjusting Time Automatically:

Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.

The time is not adjusted when the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.

NOTE

Automatic Time Adjustment

• The text you selected automatically appears on the date you set

when the unit’s power is first turned on. (Calendar function)
Pressing the CLK button for one second or more scrolls the
display once, regardless of the text scroll setting.
Pressing a button other than the CLK button will cause the text
to disappear from the display.

• You can enter up to 32 characters for each text.
• The calendar function can be set up to 30 cases.
• To delete the date and text setting, set both the month and day

of the date to "00" or set all of the text to blanks.

NOTE

Hold down either the

4 or ¢ button for two seconds or

more to enter the Memo mode.
The date display will blink.

Selecting the set of the date and text to be displayed

Press the FM and AM button.
If you want to input a new text, select the blank display.

Entering the month or day setting mode

Press the

4 and ¢ button to enter the month or day

setting mode.
The month display will blink enter the month setting mode, the
day display will blink enter the day setting mode.

Changing the month or day

Press the FM and AM button.

Entering the text input mode

Press the

¢ button to enter the text input mode.

The cursor blinks in the position where character input can be
made.

Inputting / Changing the text

• Moving the cursor

Press the

4 and ¢ button.

• Changing the type of characters

Press the TI button.
Each time the button is pressed, the type of characters
switches as follows.

• Selecting the character

Press the FM and AM button.

Press the MENU button to end the menu mode.

Alphabet (upper case): A ~ Z

Alphabet (lower case): a ~ z

Numerals and symbols: 0~9 @ ” ‘ ` % &

* + - = , . / \ < > [ ]

Special characters: б а й и н м у т ъ щ С З ® Я ‹ fl в д к

— 23 —