Vcr operation (continued) – Kodak XBS444 User Manual
Page 26
26
VCR Operation (Continued)
Instant Timer Recording
Instant Timer Recording allows you to make a recording
easily of a preset length without using the programma-
ble timer.
Preparation:
Turn on the power of both the DVD+Hi-Fi VCR and the TV.
Be sure the TV is tuned to the DVD+Hi-Fi VCR output channel (3
or 4).
If a direct VIDEO/AUDIO connection is made between the
DVD+Hi-Fi VCR and the TV, set the TV’s source selector to
VIDEO.
11
Insert a video cassette with the anti erasure
safety tab intact.
2
2
Select the desired channel with
v
v
/
V
V
or number
(0-9).
The channel number appears on the TV screen.
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINE1 or
LINE2. with INPUT.
3
3
Select the desired recording speed (SP or SLP)
with SPEED.
The tape speed will appear on the TV screen.
4
4
Press REC/ITR (
z
z
) twice.
The menu as illustrated, will appear on the TV screen.
Recording will start. (The
indicator will light)
5
5
Press REC/ITR (
z
z
) repeatedly to select the
recording time length.
At the end of the recording, the DVD+Hi-Fi VCR will
stop recording and shut off.
Whlie Instant Timer Recording is active, changing the
channel on the DVD+Hi-Fi VCR will not be possible.
To stop the recording, press STOP or POWER twice.
INSTANT TIMER RECORD MENU
Checking the Recording Time
Press REC/ITR (
z
) once to check the recording time.
The recalled setting will automatically return to the TV
screen after 6 seconds.
To extend the Recording Time
The recording time can be extended anytime by press-
ing REC/ITR (
z
).
Subsequent presses result in advancing the recording
time by 30-minute increments.
otes
If you press PAUSE/STEP (
X
) while in instant timer record-
ing mode, the DVD+Hi-Fi VCR will enter the recording pause
mode. Instant timer recording is cancelled.
If the DVD+Hi-Fi VCR is set to “0H00M”, the DVD+Hi-Fi
VCR goes to normal recording mode.
Dubbing and Editing
If you wish to edit or dub your camcorder (or another
VCR) recordings to this DVD+Hi-Fi VCR, the rear (or
Front) panel mounted Audio and Video (A/V) input
jacks make the connections quick and easy. These
direct A/V jacks will also provide better picture results
than using the RF jack on the rear panel.
11
Connect the camcorder’s (or another VCR’s) A/V
outputs to your DVD+Hi-Fi VCR as illustrated on page
13.
2
2
Set the input channel “LINE2”. (Use INPUT to
select LINE2.)
If you have connected your DVD+Hi-Fi VCR to the A/V
input jacks on the rear of DVD+Hi-Fi VCR, you should
select the input channel LINE1 by pressing INPUT
twice.
3
3
Play the tape in the camcorder (or another
VCR). If you have a TV attached to your
DVD+Hi-Fi VCR, you can see the video playing.
4
4
When you desire the recording to begin, press
DVD+Hi-Fi VCR’s REC/ITR (
z
z
) once to start.
otes
Before recording, please confirm the recording start position.
To stop the editing, press STOP (
x
) twice.
Copying from DVD to VCR
This unit is capable of copying the contents of a DVD
to a VHS tape.
ote
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs. “LOCK” is
displayed in the display window.
11
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2
2
Insert VHS Tape
Insert a blank VHS video tape into the VCR deck.
3
3
Press PLAY (
B
) on the DVD deck.
The DVD will go into play mode
If the DVD disc menu appears, you may need to press
PLAY (
B
) manually to begin copying.
4
4
Press REC/ITR (
z
z
) on the front panel or remote
control.
The DVD+Hi-Fi VCR will go into Record mode.
“COPY” indicator will light.
5
5
Stop the Copy Process
When the DVD is finished playing, press STOP (
x
) or
POWER twice to end copying.
You must stop the Copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.
ote
When you stop the DVD playback during copying, VCR
recording mode also stops automatically.
INSTANT TIMER RECORD
CHANNEL
2
SPEED
SP
START
NOW
LENGTH
0H30M
0H30M ..... 9H00M
➝
0H00M
Length Display
(each additional press of
REC/ITR (
z
z
) increases recording
time 30 minutes)