Kodak XBS444 - Manual (Page 25)

OPERA
TION
25
110 0 Use V V to choose the SPEED option.
Use b b / B B to choose the desired recording
speed (AUTO, SP or SLP).
AUTO mode determines how much tape is left and
switches speed from SP to SLP, if necessary, to
complete recording the program. There will be some
picture and sound distortion at the point of the speed
change.
1111 Use V V to choose the REPEAT option.
Use b b / B B to choose the desired repeat (ONCE,
WEEKLY or DAILY).
ONCE event....for recording up to 8 programs on a
single day or over the days within a period of 1 year.
WEEKLY event....for recording up to 8 programs on a
certain day of every week.
DAILY event....for recording up to 8 programs at the
same time(s) Monday through Friday.
ip
If the input data is wrong, use v v to select the data
and correct it using b b / B B .
112 2 Press MENU, the program will be memorized
by the DVD+Hi-Fi VCR.
indicator lights in the display window.
If the program preset time has past, the PAST TIME
PROGRAMMED message will appear on the TV
screen. Return to the incorrect program and program
it with the correct time.
If you had entered a past date, timer recording will
be performed on that date of the next year.
Additional programs may be entered by repeating
steps 1-12.
Cable Users: If your cable hookup is via a TV
converter box, you can program multiple recordings
only on the converter box output channel. This is
because the converter determines what channel you
view through your DVD+Hi-Fi VCR.
ip
If you are finished programming and you want to set the
DVD+Hi-Fi VCR to record the programs you have entered,
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
DVD+VCR. The DVD+Hi-Fi VCR is now set to record the pre-
set programs.
After setting up a timer recording, recording will start if
no other timer recordings overlap the start time, see
next column.
otes
If the power fails or the DVD+Hi-Fi VCR is unplugged
from the AC outlet, the correct clock time and timer set-
tings are kept in memory for approximately 3 seconds.
After 3 seconds, the clock and program timer must be
reset when power is restored. Reset the clock accord-
ing to instructions.
After timer recording is completed, the DVD+Hi-Fi VCR
will turn off automatically.
To watch a TV program while timer recording is in
progress, select Tuner mode by pressing TV/VCR
repeatedly.
If you wish to stop timer recording which has already start-
ed, press STOP or POWER twice.
Checking (Erasing) Timer Record
Programming
Programming can be checked whenever the DVD+Hi-Fi
VCR is turned on.
1 Press MENU and the MAIN menu will appear.
2 Use
v / V to choose the PROGRAM menu.
Press MEMORY/ENTER and the PROGRAM menu
will appear.
3 Use b / B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
4 Press MENU to return to the TV screen.
Program Priority
If the recording start and
end times of preset
programs overlap on the
same day (see the example
and diagram left), program
number 2 will not be
recorded until program
number 1 is finished.
The first part of program number 2 will not be recorded.
The same thing will happen to program number 3.
VCR Operation (Continued)