Kenwood KDV-7241 - Manual (Page 32)

32 | KDV-7241
Menu items Selectable settings, [reference page]
Disc Setup 1
* 5
Monitor Type Select the monitor type to watch a wide screen picture on the external
monitor.
16:9 : Select when the aspect ratio of the external monitor is 16:9.
4:3 Letterbox/4:3 Pan Scan : Select when the aspect ratio of the
external monitor is 4:3. Refer to the illustrations on the left to see
how the pictures are shown on the monitor.
OSD Position Select the position of the on-screen bar, ☞ [25].
1 : Higher position
2 : Lower position
File Type Select playback file type when a disc contains different types of files.
Audio : Plays back audio files.
Still Picture : Plays back JPEG files.
Video : Plays back DivX/MPEG1/MPEG2 files.
DivX Regist. (Registration) This unit has its own Registration Code. Once you have played back a
disc in which the Registration Code recorded, this unit’s Registration
Code is overwritten for copyright protection.
Disc Setup 2
* 5
D. Audio Output Select the signal format emitted through the DIGITAL OUT (optical)
terminals. (☞ also page 40)
PCM Only : Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital, DTS, or MPEG Audio, or
connecting to a recording device.
Dolby Digital : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital.
Stream : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital, DTS, or MPEG Audio.
* 5 Selectable only for “DISC” (disc playback pauses).
Position 1 Position 2
16:9 4:3 Letterbox
4:3 Pan Scan