Kenwood KDV-7241 - Manual (Page 10)

10 | KDV-7241
1 • Turns on the power.
• Attenuates the sound if the power is on.
• Turns off the power if pressed and held (while
the power is on).
2 Selects the source.
3 Selects the TUNER bands.
4 Changes the aspect ratio of the playback
pictures.
5 Not used for this unit.
6 Adjusts the volume level.
• Not used as 2nd VOL button for this unit.
7* 1 • DVD/DivX 6: Shows the disc menu.
• VCD: Resumes PBC playback (☞ page 23).
8* 1 Not used as SETUP button for this unit.
9 SHIFT button
Basic operations —
Remote controller
Installing the lithium coin battery (CR2025)
If the range of effectiveness of the remote controller
decreases, replace the battery.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
The unit is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate
volume) for connection.
Warning:
To prevent accidents and damage
• Do not install any battery other than CR2025 or
its equivalent.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
Main elements and features