Karcher KMR 1250 B - Manual (Page 24)

KMR 1250 B User Instructions English
49
Replacing fuses
Replacing the dust filters
The dust filters should be inspected for damage every 50
operating hours.
A significant build-up of dust at the air outlet from the fan is
a sign of a filter that is not fitted properly or is defective.
n
Raise the hopper half way 1 .
n
Release the catches on the filter box 2 .
n
Swivel the filter box forwards and lift it off 3 .
n
Open out the handle, pull it outwards and turn it through
90º (make sure it engages)
4 .
n
Remove the filter cartridge 5 .
n
Insert a new filter cartridge (pins should fit into the
holes)
6 .
n
Set the handle back to its original position and lock it.
Make sure the filter is correctly seated.
n
Mount the filter box and engage the catches.
n
Park the sweeper and switch off the engine.
n
Open the unit cover.
n
Replace a defective fuse with one of the same current
value.
Note:
Repeated defects of the same fuse indicate a technical fault
in the electrical system. Please call Kärcher Customer
Service.