Keys Fitness Alliance A7 Upright A7u - Manual (Page 7)

Assembly
7
Step 3 (Figure 3)
A) Connect Upper Wire Harness (H8) to Lower
Wire Harness (A39).
Note: Upper Wire Harness will be located
inside the Console Tube (H1).
B) Slide Console Tube (H1) into Main Frame
(A1) and secure using four Flat Allen Head
Bolts (H7). Insert Decoration Cap (B4) into
each bolt hole.
Step 4 (Figure 4)
A) Connect Upper Wire Harness (H8) to Console
(H6).
B) Secure Console (H6) to Console Tube (H1)
using six Round Head Screws (A36) and six Flat
Washers (A24).
Figure 3
Figure 4