Kodak EasyShare 4000 - Manual (Page 36)

26
Chapter 4
Transferring Pictures
You can transfer pictures directly from your Kodak EasyShare camera to your
computer (see your camera user’s guide).
With the camera docked, you can transfer pictures through the printer dock.
1 Make sure the Kodak EasyShare software is installed (see Installing the
Software, page 21 ) and the printer dock is connected to your computer
(see Connecting to a Computer, page 25 ).
2 Place the camera in the printer dock (see Docking and Charging the
Camera, page 14 ).
3 Press the Transfer button on the printer dock.
A new drive appears for the printer dock, and the Kodak EasyShare
software opens on your computer (if it is installed).
4 Use the Kodak EasyShare software to transfer pictures from the printer
dock to your computer.
The printer dock Transfer light blinks green while the pictures are
being transferred. Charging is suspended during transfer.
See your camera quick start guide or the Kodak EasyShare software Help
for information on installing and using the Kodak EasyShare software.
NOTE: If the Kodak EasyShare software is not installed, you can transfer from
the printer dock to your computer by copying pictures from the newly
established camera drive to your computer hard drive. See your
computer documentation for details.
urg_00170.book Page 26 Thursday, August 14, 2003 7:20 AM