Connecting to a computer – Kodak EasyShare 4000 User Manual
Page 35
25
Chapter 4
Connecting to a Computer
A USB cable is required to connect to a computer. Use the USB cable that came
with your Kodak EasyShare camera. To purchase one separately, see a retail
dealer of Kodak products or visit
CAUTION:
Make sure your camera is NOT in the printer dock when
you are connecting to the computer.
1
Make sure the power is connected to the printer dock (see
), and the Kodak EasyShare printer dock software is installed
on the computer (see
Installing the Software, page 21
2
Plug the labeled end of a USB cable into
the labeled USB port on your computer. See
your computer documentation for details.
3
Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.
urg_00170.book Page 25 Thursday, August 14, 2003 7:20 AM