Kyocera TNT VMS200 - Manual (Page 48)

40 Convenience
Fast find
With Fast Find enabled, you can press one or two
keys to view close matches of the number you are
looking for.
1.
From the main screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed
dial entry appears.
2. Scroll to your desired contact and press the
Call key to call the number.
To enable Fast Find, select Menu > Settings >
Convenience > Fast find > Enabled .
Frequent list
From the main screen, select Contacts . The last
15 of your most frequently called contacts appear
with the Frequent List enabled. Scroll past the
double line to view the entire Contacts list.
To enable Frequent List, select
Menu >
Settings > Convenience > Frequent list >
Enabled .
Hold call
The Hold Call feature enables you to place
incoming calls on hold until you are ready to
answer them.
Note: The Hold Call feature does not work with
the Open to Answer feature enabled. See “Open to
answer” on page 43.
Enable hold call feature
1. Select Menu > Settings > Convenience >
Hold Call > Enabled .
If you have not recorded a hold message, you
need to record one, such as “Please hold. I’ll
answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following.
–
Play to replay your message.
– Re-record to record your
message again.
– Exit to exit.
The next time a call comes in, you can place
it on hold.
Place a call on hold
You can place a call on hold once you have
enabled this feature.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. With no call waiting enabled, the call
goes to voicemail.
When a call comes in, do the following:
1.
Select Options > Hold Call to place the
caller on hold and play your recorded
hold message.
2. Select Answer to speak to the caller on hold
or End Call to hang up without speaking.
82-K8214-1EN.book Page 40 Tuesday, May 27, 2008 5:36 PM