Kyocera FS-C8100DN - Manual (Page 2)

0802DSEC8
100DNESMC
Your Kyocera Business Partner:
Kyocera does not warrant that any specifications mentioned will be error-free. Specifications are subject to change without
notice. Information is correct at time of going to press. All other brand and product names may be registered trademarks or
trademarks of their respective holders and are hereby acknowledged.
KYOCERA MITA Europe B.V., Hoeksteen 40, 2132 MS Hoofddorp, The Netherlands, Tel +31 (0) 20 65 40 000, Fax +31 (0) 20 65 31 256,
www.kyoceramita-europe.com, [email protected]
KYOCERA MITA Corporation, 2-28, 1-Chome, Tamatsukuri, Chuo-Ku, Osaka 540-8585, Japan, www.kyoceramita.com
FS-C8100DN
A3 COLOUR PRINTER
ECOSYS devices are designed
to minimise both purchase
costs and running expenses, such as main-
tenance, administration and consumables.
The cartridge-free system requires only the
toner to be replaced. The modular design
concept allows you to add workflow-
enhancing functions and a wide variety of
paper handling capabilities as required.
Integrated system software provides long-
term cross-network compatibility. Kyocera’s
long-life components cost you and the
environment less.
System platform:
The FS-C8100DN offers USB, parallel and network connectivity as standard and delivers problem-free system administration.
Kyocera’s single-platform technology means that the same driver can be used for every Kyocera PCL/PostScript print device
on the network; from single-user desktop printers to high-end multifunctional systems. Only Kyocera offers this effortless
combination of IT sophistication and high-performance paper handling expertise.
PRESCRIBE IIc:
With the Kyocera page design and control language PRESCRIBE IIc, even complex graphics, logos and forms (even multipart
forms) can be created independently of the system and saved and updated in the printer. Consequently, integration into
print files no longer applies. They are only accessed as required and therefore relieve the load on the network.
KM-NET for Client/KM-NET Viewer:
The settings of all printers on the network can be checked visually and amended from any Windows® PC. KM-NET for Client
enables easy setup and monitoring of the printer status via parallel, USB or network connection. KM-NET Viewer is an
advanced printer management software tool using the standardised protocol SNMP.
Pr
oduct
depict
ed
includes
optional
extras
Select your options to suit your needs:
Paper feeder (PF-710)
Booklet unit
(BF-710)
Punch unit (PH-5C)
Mailbox (MT-710)
Document finisher
(DF-710)
GENERAL
Technology: Kyocera laser colour ECOSYS
Engine speed: Max. 32/16 pages per minute A4/A3 in b/w
mode and in full colour mode
Resolution: 600 x 600 dpi multi-bit technology
Time to first page: 5.9 seconds or less in b/w, 7.9 seconds or
less in colour
Warm-up time: 45 seconds or less
Duty cycle: Max. 120,000 pages per month,
max. average 20,000 pages per month
Power source: AC 220 ~ 240 V, 50/60 Hz
Power consumption: Printing: 840 W, Stand-By: 210 W,
Power-Saving (ECOpower): 15 W
Noise (ISO 7779): Printing: 53.7 dB(A), Stand-By: 43.8 dB(A)
Power-Saving (ECOpower): Immeasurably low
Dimensions (W x D x H): Main unit: 605 x 670 x 680 mm
Weight: Main unit: Approx. 87 kg
Certification: TÜV/GS, CE, PTS
This product is manufactured according to ISO 9001 quality
standard and ISO 14001 environmental standard.
PAPER HANDLING
All paper capacities quoted are based on a paper thickness
of max. 0.11 mm. Please use paper recommended by Kyocera
under normal environmental conditions.
Input capacity: 2 x 500-sheet universal paper cassette,
60-105 g/m
2 , A3-A5R, Letter, Legal, Custom (over A4 size up
to 250 sheets in 1. paper cassette)
100-sheet multi-purpose tray, 60-220g/m
2 , A3-A6R, Folio,
envelopes
Max. input capacity with options: 4,100 sheets
Duplex as standard supports A3-A5, 60-105 g/m
2
Output capacity: 500 sheets
PRINT FUNCTIONS
Processor: PowerPC 750GL / 800MHz
Memory: Standard 256MB, max. 1,024MB in two DIMM slots
Emulations: PCL6/PCL5e/PCL5c, KPDL3 (PostScript 3
compatible), KC-GL (HP-7550A), PDF direct printing
Controller language: PRESCRIBE IIc
Fonts: 80 outline fonts (PCL6), 136 outline fonts (KPDL3),
1 bitmap font, 45 types of one-dimensional barcodes,
plus two-dimensional barcode PDF-417
Print features: eMPS – for quick copy, proof and hold,
private print, colour control with 100 department codes
Interfaces
Standard interface: High-speed bi-directional parallel
(IEEE 1284), USB 2.0 (Hi-Speed), Fast Ethernet 10/100Base-TX,
2 KUIO-LV slots
Multiple interface connection (MIC): Allows simultaneous
data transfer via up to four interfaces, with each interface
having its own virtual printer.
OPTIONS
Paper handling
PF-710 Paper feeder: 2 x 500 sheets, 60-105 g/m
2 , A3-A5R,
Folio
PF-750 Paper feeder: Max. 3,000 sheets, 60-105 g/m
2 , A4,
B5, Letter
DF-710 Document finisher + AK-710* + AK-715*:
Main tray: Max. 3,000 sheets A4 or 1,500 sheets A3
face-down, 60-105 g/m
2 , A3-B5,
Sub tray left: Max. 200 sheets A4 or 100 sheets A3/B4
face-up, 60-105 g/m
2 , A3-A6R,
Sub tray right: Max. 50 sheets A4 face-up, 60-105 g/m 2 ,
A4-A6R,
Stapling: Max. 50 sheets A4 or 30 sheets A3, stapling at 3
positions
DF-730 Document finisher + AK-715*: Max. 1,000 sheets A4
or 500 sheets A3/B4, 64-105 g/m
2 , A3-B5, one position
stapling max. 30 sheets A4 or 20 sheets A3/B4, 64-105 g/m 2
PH-5C/PH-5D Punch unit for DF-710: A3-A5R, 60-105 g/m 2 ,
2-hole/4-hole/Swedish type
MT-710 Mailbox for DF-710: 7 bins, 60-80 g/m
2 , A3-A5R,
7 bins x 100 sheets A4 or 50 sheets A3/B4
BF-710 Booklet unit for DF-710: Max. 64 pages (16 sheets)
booklet folding and stapling, 60-80 g/m
2 , cover sheet
60-105 g/m 2 , A3, B4, A4R
*Adapter-Kits are required for the use of the document
finishers.
The use of the hard disk HD-5 or extended RAM-Disk size is
highly recommended to achieve full document finisher
functionality.
CB-700 Cabinet: Wooden desk with storage capacity
CB-710 Cabinet: Metal desk with storage capacity
Memory
Printer memory
DIMM memory: DDR-SDRAM DIMM 2 slots (64, 128, 256,
512MB), 1 slot empty
CompactFlash® card: 1 slot (up to 2GB) for printing forms,
fonts, logos, macro storage
HD-5 Hard disk: 40GB HDD for easy document management
Data security kit (D): For secure encryption and deletion of
files on HD-5
OCR-2: Font ROM with OCR-A and OCR-B font types
Optional interface for print functions
IB-23 Network card: 10Base-T/100Base-TX
SB-70 Network card: Wireless LAN – IEEE 802.11b
SB-110FX Network card: 10Base-T/100Base-TX/100Base-FX,
FibreOptic
SB-110 Network card: 10-Base-T/100Base-TX
IB-11 Serial interface: RS-232C serial interface
(max. 115.2 kbps)
CONSUMABLES
TK-820Y Toner-kit: Microfine toner yellow for 7,000 pages
TK-820M Toner-kit: Microfine toner magenta for 7,000 pages
TK-820C Toner-kit: Microfine toner cyan for 7,000 pages
TK-820K Toner-kit: Microfine toner black for 15,000 pages
Capacity of starter toner is 3,500 in CMY and 7,500 in black.
WARRANTY
2-year warranty as standard. Kyocera guarantees the drums
and developers for 3 years or 300,000 pages (whichever
occurs sooner), provided each printer is used and cleaned
in accordance with the service instructions.
The up to 5-year on-site warranty
extension for printer and options.
FS-C8100DN_DS.qxd 12.02.2008 17:52 Uhr Seite 2
IB-23 Network card: 10Base-T/100Base-TX
IB-11 Serial interface: RS-232C serial interface
(max. 115.2 kbps)
PS159: Wireless LAN (802.11b/g)
PS1109 Gigabit Ethernet:
10BaseT / 100BaseTX / 1000BaseT (RJ-45)
PS129 Fibre Optic: 100BaseSX (SC)
PS1129 Gigabit Fibre Optic: 1000BaseSX (SC)