Inserting a microsd or microsdhc card – Kodak ZM1 User Manual
Page 8
2
www.kodak.com/go/support
Setting up your camera
Inserting a MICROSD or MICROSDHC Card
Your camera has limited internal memory—good for a few practice videos/pictures.
Check your product packaging to see if a MICROSD or MICROSDHC Card is included.
If not, we strongly suggest that you purchase a card. (If a card is included, it
may already be inserted.) Maximum supported card size is 16 GB.
CAUTION:
A card can only be inserted one way; forcing it may cause damage.
Inserting or removing a card while the camera is on may damage the
video/pictures, the card, or the camera.
Close the door properly
Purchase accessories
1 Turn off the camera.
2 Insert the card until
it clicks and locks
into place.
To remove the card,
push and release it,
then pull it out.
NOTE: Avoid touching the
card’s metal contacts.
To clean the contacts, use a dry
cotton swab or a lint-free cloth.
Metal
contacts
face up.