Kenwood B64-1627-00 - Manual (Page 29)

When this system is set to on, the sound coordinate factors
(Bass frequency, Bass quality, Bass extension, and Treble
frequency) appear during the audio control mode.
Display and setting:
"Kex/ec4/dB (set) ON" : The sound coordinate factors appear
and can be adjusted.
"Kex/ec4/dB (set) OFF" : The sound coordinate factors are not
appeared.
KEX/ec4/dB (Sound Coordinate system)
This function allows you to turn off the lower part of the
display if there is too much information in the display.
Display and setting:
"BLK MASK/BMSK ON" : The display will turn on by using only
the upper part of the display and the
IN indicator (KDC-6080R/6080RV
only).
"BLK MASK/BMSK OFF" : The display will turn on by using the
whole part of the display.
Black Mask
Display and setting:
"Graphic/GRAP ON" : The graphic display works.
"Graphic/GRAP OFF" : The graphic display does not work.
You can turn the movement of graphic display on and off.
The initial setting is ON.
Switching Graphic Display
Function of the KDC-6080R/KDC-6080RV
You can dim the display.
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.
NOTE
Dimmer
Function of the KDC-6080R/KDC-6080RV
This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
The initial setting value is "5" .
NOTE
Contrast Adjustment
You can switch the colour of the button illumination between
green and red.
Display and setting:
"Color Green/COL GRN" : The colour of the illumination is
green.
"Color Red/COL RED" : The colour of the illumination is red.
Selectable Illumination
— 29 —