Kenwood KVT-534DVD - Manual (Page 77)

English 77
If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 3.
2 Enter the security code
Now, you can use your Receiver.
Deactivating Security Code
To deactivate the Security Code function.
1 Display Security Code Setup screen
Touch in the "Setup
Menu" screen (page 62).
2 Start to cancel a registration of the
Security Code
3 Enter a security Code
Input by four-digit number.
4 Register your security code
Now, your security code is cleared.