Hands free unit control – Kenwood KVT-534DVD User Manual
Page 50
50 KVT-514/KVT-534DVD
Hands Free Unit Control
Control Screen Function
Displaying the control screen and using various
functions.
1
Display the Hands-Free Control screen
Press the [FNC] button for more than 1 second.
1
2
3
4
5
6
7
8
9
10
11
12
1 Displays the various conditions.
: Displays short message status. If a cell-
phone which supports SMS function
is not connected, this mark does not
appear.
: There is unread short message.
: There is no unread short message.
: Downloading Phonebook.
: Indicates there is a call on hold.
: Displays the signal strength.*
The more the number of bar segments,
the stronger the signal.
: Displays the present Auto Answering
status
: When Auto Answering is on
: When Auto Answering is off
: Displays the battery drain of the cell-
phone.*
The more the number of bar segments,
the higher the battery level.
Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unit
connected only)
• You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the
Bluetooth Unit as well.
• To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of
your Bluetooth Unit and your cell-phone.
2 Displays the called phone numbers.
If you have registered a phone number in
the Phonebook, the destination person
name is displayed.
3 Calls the displayed preset phone number.
4 Displays the SMS Select screen.
See
61).
5 Displays the Search for Phonebook screen.
See
6 Displays the Outgoing Calls screen.
See
7 Displays the Incoming Calls screen.
See
8 Calls the preset phone number.
For information on how to preset a phone
number, see
60).
9 Displays the Hands-Free Set Up screen.
See
(page 57).
p Displays the Dialing Display screen.
See
(page 52).
q Starts voice recognition.
See
56).
w Returns to the previous screen.