Kunz C60K - Manual (Page 10)

For Model E60B:
Set the throttle lever in the
choke position to set the choke. (The throttle lever is located on the
Start engine and move throttle toward
slow position to disengage choke.
Slow engine speed and engage mower blades clutch handle. (The clutch handle is located at
ote: Some belt squealing may occur on engagement. This is normal for a manual clutch
If the mower’s engine happens to quit while in use take care to remove the wing
the
Adjust engine speed to
fast position for full throttle. (The full throttle is located at the detent
E. SHU TING OFF WING MOWER
Shift to neutral, disengage power to the mower deck, and set the parking brake
For Models H60T, H60B & C60K:
right side of the engine.)
the front of the mower under the engine.)
N
engagement design.
mower from the uncut area before attempting to engage the clutch. Also inspect
blades for any obstructions that may prevent blade engagement. Failure to do either
may result in premature belt failure or even a fire.
position on the throttle control.)
T
before dismounting the tow vehicle.
Set the throttle to slow so the mower blades clutch will disengage.
llow engine to cool down for a short time before turning the engine off.
For Model E60B:
A
Slow the engine speed down and disengage the clutch handle.
Allow engine to cool down for a short time before moving the throttle control to the
stop position.
F. MOWER OPERATION
Clean or replace any safety signs that are not readable or damaged.
Remove all objects from the work area that might be picked up and thrown by the
Do not mow when children and others are around.
blades.
9