Kensington MP-700 - Manual (Page 57)

57
Basic Operation
Remote Control Operation
Main Unit Operation
Remote Control Operation
Main Unit Operation
Remote Control Operation
Main Unit Operation
SET
POINTER
POINTER/
SET
SCROLL
OHP STORED IMAGE
VOLUME
OHP STORED IMAGE
REFRESH
FREEZE
FREEZE
REFRESH
3
The image data are displayed as thumbnails,
use the SCROLL button to select the image
you want to display and then press the
SET
POINTER
button (or the POINTER/
SET button on the remote control).
The image you selected is displayed.
4
Display the next (previous) slide.
Press the OHP STORED IMAGE button while the slide is
displayed to switch to the next (previous) slide.
button: Display the slide previous to the currently dis-
played slide from CF card.
button: Display the slide following the currently displayed
slide from CF card.
5
Quit the slide display.
Press either the REFRESH button or the INPUT SELECT
button to quit the slide display. If you press the
REFRESH button, the refreshed frozen OHP image is dis-
played. If you press the INPUT SELECT button, each input
image is displayed.
NOTE
• All of the INPUT SELECT button LEDs go out when displaying the image data that has been saved to the CF
Card.
• You can also display images by selecting “Slide display” on the Quick menu in step 3.
• You can switch slides by selecting “Display the next (previous) slide” in the Quick menu in step 4. See page 54 for
more information.
MMP J0030 MMP J0002 MMP J0003
MMP J0006 MMP J0007 MMP J0008
MMP J0011 MMP J0012 MMP J0013
MMP J0016 MMP J0017 MMP J0018
MMP J0005
MMP J0010
MMP J0015
MMP J0004
MMP J0009
MMP J0014
MMP J0019
Cha.05-3 04.7.29, 11:46 AM 57