Kodak CP-48S - Manual (Page 5)

Using the KODAK EKTACOLOR Processing Cartridge 111 with Digital Minilabs, CP-48S/CP-49E CIS-229E 5
PREPARING FRESH WORKING TANK SOLUTIONS
Use KODAK EKTACOLOR PRIME LORR Chemicals to
prepare fresh developer and bleach-fix working tank
solutions. You will need these chemicals:
1. EKTACOLOR PRIME SP Developer Replenisher
LORR, CAT No. 527 0996
2. EKTACOLOR RA Developer Starter,
CAT No. 527 8957
3. EKTACOLOR PRIME SP Bleach-Fix Replenisher
LORR, CAT No. 528 8105
4. EKTACOLOR PRIME SP Bleach-Fix Starter,
CAT No. 528 8139
Follow the mixing instructions in the appropriate tables below.
Table 1a Preparing Fresh Developer Tank Solution with KODAK EKTACOLOR PRIME
SP Developer Replenisher LORR
To the specified volume of water, add the PRIME SP Developer Replenisher LORR
concentrate directly from the bottle, then EKTACOLOR RA Developer Starter. If necessary,
add a small amount of extra water to finish filling the tank. Allow the recirculation pumps to
mix the solution when the processor is turned on.
Minilab Model
Tank
Volume
(Litres)
Water
(Litres)
EKTACOLOR PRIME
SP Developer
Replenisher LORR
Concentrate (mL)
EKTACOLOR RA
Developer Starter
(mL)
To make 1 litre 890 mL 65 mL 45 mL
FUJI 330 9.4 8.35 610 420
FUJI 340 7.1 6.32 460 320
FUJI 350 or 355 12.7 11.1 810 560
FUJI 370 or 375 16.5 14.7 1070 740
FUJI 390 54.5 48.5 3540 2450
FUJI 550 or 570 11.0 9.79 715 495
NORITSU
3501/3502F
8.5 7.56 553 383
NORITSU
3701/02/03F
12.9 11.48 839 580
NORITSU 3704F 14.9 13.261 969 670
NORITSU 3705F 14.0 12.46 910 630