Specifications – Kenwood DDX6027 User Manual
Page 80
80
|
English
Specifications
Monitor section
Picture size
: 6.4 inches (diagonal) wide
143.6(W)×77.1(H)mm
Display system
: Transparent TN LCD panel
Drive system
: TFT active matrix system
Number of pixels
: 336,960 (480H×234V×RGB)
Effective pixels
: 99.99%
Pixel arrangement
: RGB striped arrangement
Back lighting
: Cold Cathode Fluorescent Tube
DVD section
D/A Converter
: 24Bit
Decoder
: Linear PCM/Dolby Digital/dts/MP3/WMA
Wow & Flutter
: Below Measurable Limit
Frequency response
Sampling frequency;96k: 20~22,000Hz
Sampling frequency;48k: 20~22,000Hz
Sampling frequency;44.1k: 20~20,000Hz
Total harmonic distortion (1k)
: 0.007%
Signal to Noise ratio
: 98dB (DVD 96k)
Dynamic range
: 98dB (DVD 96k)
DISC Format
: DVD-Video/VIDEO-CD/CD-DA
Sampling frequency
: 44.1kHz/48kHz, 96kHz
Quantifying bit number
: 16/20/24bit
FM Tuner section
Frequency range (50kHz)
: 87.5~108.0MHz
Usable sensitivity (S/N=26dB)
: 0.7µV/75Ω
Quieting sensitivity (S/N=46dB)
: 1.6µV/75Ω
Frequency response (±3.0dB)
: 30Hz~15kHz
S/N (dB) (MONO)
: 65dB
Selectivity (±400kHz)
: ≥ 80dB
Stereo separation
: 35dB (1kHz)
LW Tuner section
Frequency range (9kHz)
: 153kHz~281kHz
Usable sensitivity
: 25µV
MW Tuner section
Frequency range (9kHz)
: 531kHz~1611kHz
Usable sensitivity
: 45µV
Video section
Color system of external video input
: NTSC/PAL
External video input level (RCA jacks)
: 1Vp-p/75Ω
External audio max input level(RCA jacks)
: 1V/22kΩ
Analog RGB input
: 0.7Vp-p/75Ω
Audio section
Maximum Power (Front&Rear)
: 50W×4
Output power (Front&Rear) (DIN 45324, +B=14.4V)
: 30W×4
Preout level (V)
: 5V/10kΩ
Preout impedance
: 80Ω
Tone action
Bass: 100 Hz ±10 dB
Middle: 1 kHz ±10 dB
Treble: 10 kHz ±10 dB
General
Operating voltage
: 14.4V (11V~16V)
Current consumption
: 15A
Dimensions (W×H×D)
: 182mm×112mm×163mm
Operational temperature range
: -10°C~60°C
Storage temperature range
: -20°C~85°C
Weight
: 2.9kg
Specifications subject to change without notice.
Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light
incorrectly.