Kenwood KDC-PS9080R - Manual (Page 33)

With automatic time adjustment, you can set the clock time
automatically according to time data sent from RDS stations
(after receiving RDS signals for several minutes). You can also
set the time manually if the automatic time adjustment
function is turned off. The factory default is automatic time
adjustment.
Display and setting:
"SYNC ON" : Automatic time adjustment
"SYNC OFF" : Manual time adjustment
Adjusting Time Automatically:
Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.
The time is not adjusted when the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.
NOTE
Automatic Time Adjustment
• The text you selected automatically appears on the date you set
when the unit’s power is first turned on. (Calendar function)
The text scrolls when text scroll is set to automatic scrolling.
Pressing the DISP button for one second or more scrolls the
display once, regardless of the text scroll setting.
Pressing a button other than the DISP button will cause the text
to disappear from the display.
• You can enter up to 32 characters for each text.
• The calendar function can be set up to 30 cases.
• To delete the date and text setting, set both the month and day
of the date to "00" or set all of the text to blanks.
NOTE Hold down either the 4 or ¢ button for two seconds or
more to enter the Memo mode.
The date display will blink.
Selecting the set of the date and text to be displayed
Press the FM and AM button.
If you want to input a new text, select the blank display.
Entering the month or day setting mode
Press the 4 and ¢ button to enter the month or day
setting mode.
The month display will blink enter the month setting mode, the
day display will blink enter the day setting mode.
Changing the month or day
Press the FM and AM button.
Entering the text input mode
Press the ¢ button to enter the text input mode.
The cursor blinks in the position where character input can be
made.
Inputting / Changing the text
• Moving the cursor
Press the 4 and ¢ button.
• Changing the type of characters
Press the 38 button.
Each time the button is pressed, the type of characters
switches as follows.
• Selecting the character
Press the FM and AM button.
Press the MENU button to end the menu mode.
8
Alphabet (upper case): A ~ Z
Alphabet (lower case): a ~ z
Numerals and symbols: 0~9 @ ” ‘ ` % & ∗ + - = , . / \ < > [ ]
Special characters: б а й и н м у т ъ щ С З ® Я ‹ fl в д к
л о п ф ц ы ь с з © Ж › fi
7
6
5
4
3
2
— 33 —