Kenwood KDC-PS9080R - Manual (Page 18)

• During vertical division mode display
• The same items cannot be selected for both the upper part
and the lower part.
• When the Black Mask function is turned on, the lower part
display shows the clock only.
• During horizontal division mode
Programme Service name/
Station frequency
Band display
+ Preset station number
Graphic
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
Analog clock
Digital clock
DISP button CLK button
Right side display Left side display
NOTE
Programme Service name/
Station frequency
Radio text
Spectrum Analyzer1
Radio text
Spectrum Analyzer2
+ Clock
Spectrum Analyzer2
+ Graphic
Graphic + Clock
Date
DISP button CLK button
Upper part display Lower part display
You can change the display used when listening to the radio.
Changing the Display:
Pressing the DISP button or CLK button, the display switches
as follows:
Switching Display for Tuner
Store the frequency of the station currently being listened to.
You can then recall that station with a single touch of a button.
Select the band/ station that you want to have stored.
Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.
NOTE
2
1
Station Preset Memory
Tuner features
— 18 —
English