Kodak VERSAMARK VT3000 - Manual (Page 2)

Print technology
Continuous inkjet
Maximum print width
17.92" (45.51 cm)
Resolution
300 x 300, 300 x 600
Speed (2-up duplex)
250 fpm (76 mpm) = 1,090 ipm (8.5 x 11 in.) / 1,026 ipm (A4)
350 fpm (107 mpm) = 1,526 ipm (8.5 x 11 in.) / 1,436 ipm (A4)
500 fpm (152 mpm) = 2,180 ipm (8.5 x 11 in.) / 2,052 ipm (A4)
Pre-post options
A range of options from Kodak and others
including Hunkeler and Lasermax Roll Systems
Processing options
Fixed perforating, line-hole punching (tractor feeds),
2 or 3 hole punch and selective perforating
Paper handling
8"–20" (200 mm–520 mm) web width
Slack web input and output
Substrates
Pre-printed or blank, pinfeed or pinless roll-feed paper
Paper weight range
16–42# bond (60–160 g/m2)
Controller options
Kodak Versamark CS300c System Controller
– Input:
IPDS
– Connectivity: TCP/IP (10/100/1,000 Mbps)
Kodak Versamark CS410 System Controller
– Input:
IJPDS
– Connectivity: TCP/IP (10/100/1,000 Mbps)
Other PDLs
PCL, AFPDS, LCDS, Metacode (available through third-party converter)
Environmental operating ranges
For environments with relative humidity: 10%–90% non-condensing,
the temperature range is: 60°F–85°F (15.6°C–29.4°C)
For environments with relative humidity: 10%–60% non-condensing,
the temperature range is: 86°F–104°F (30°C–40°C)
To learn more about solutions from Kodak:
Visit: graphics.kodak.com
Or in North America, call +1-866-563-2533
Printed using Kodak Technology.
Eastman Kodak Company
343 State Street
Rochester, NY 14650
©Kodak, 2008. Kodak and Versamark are trademarks of Kodak.
Subject to technical change without notice.
U.CIJ.010.0808.en.04
Versamark VT3000 Printing System
Technical Data