Kenwood KVT-747DVD - Manual (Page 15)

English | 15
About discs
Handling discs
• Do not touch the recording surface of the disc.
• CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage
than a normal music CD. Use a CD-R/RW, DVD-R/RW, or
DVD+R/RW after reading the caution items on the package
etc.
• Do not stick a tape, sticker, etc., on the disc.
Also, do not use a disc with those materials pasted on it.
When using a new disc
If the disc center hole or outside rim has burrs, use it after
removing them with a ball pen etc.
Burrs
Burrs
Disc shaped accessory
Do not insert a disc shape accessory into the unit.
Disc cleaning
Wipe from the center of the disc to outward.
Removing discs
When removing discs from this unit pull them out horizontally.
Discs that cannot be used
• Discs that are not round cannot be used.
• Discs with coloring on the recording surface or that are dirty
cannot be used.
• This unit can only play the CDs with one of
labels.
Discs without the label may not be played on the unit.
• A CD-R or CD-RW that hasn’t been finalized cannot be
played. (For the finalization process refer to your CD-R/CD-
RW writing software user’s guide, and your CD-R/CD-RW
recorder instruction manual.)
Disc storage
• Do not leave discs in direct sunlight (On the seat or
dashboard etc.) and where the temperature is high.
• Put discs in their cases.