Kenwood KVT-747DVD - Manual (Page 11)

English | 11
Navigation *
R-CAM *
TV */ Video
* Optional accessory
DVD/VCD
You can also turn off the video display by pressing the
key longer than 1 second.
When you press the key again, the previous video
display comes back on.
7 Audio Source Selection/Power Supply
[SRC] key
Audio source selection changes in the following order
each time you press the key.
Navigation *
Weather Band Tuner *
SIRIUS *
TUNER or HD Radio *
Built-in Disc player
External Disc player *
DAB *
External Disc Changer *
TV */ Video
AUX EXT *
* Optional accessory
Standby Mode
You can also turn off the power by pressing the key
longer than 1 second.
When you press the key again,the power turns on.
8 Volume Controls
[ 5]/[∞] key
Adjusts the volume.
9 Joystick
Track/Station
Selectors
[ 4]/[¢] key
Selects a music or chapter, track, or frequency.
Band/Folder Selectors
[FM]/[AM] key
[FM] key switches to the FM1/2/3 band or next folder/
disc.
[AM] key switches to the AM band or previous folder/
disc.
p Attenuater
[ATT] key
Attenuaters the volume.
Press it again to cancel muting.
q Screen Setup
[SCREEN] key
Displays the Screen Setup or Angle Setup screen.
(page 59)
w Function/AV OUT SEL
[FNC] key
The video source function changes in the following
order each time you press the key.
Picture & Easy Control Panel
Source Control
Picture
Switches the source that is output at the AV OUTPUT
terminal when it is pressed more than 1 second.
e Switch Screen Mode/M.CTRL
[MODE] key
Switches the screen mode. (page 17)
The DVD Disc Menu screen appears when you hold
down the key more than 1 second. (page 22)
• DVD Disc Menu is not available when the top menu of the
DVD is shown.
r Small Display
[DISP] key
Switches to the Small Display. (page 16)
• Aside from the navigation system, the display turns on
when you apply the parking brake.
• It is necessary to set " Navigation Source " of
to " On " to add Navigation as an audio source that can be
selected the with [SRC] key. (page 69)
• It is necessary to engage the shift knob of car to "Reverse"
to switch to rear view camera video display.