Kawai DP100 - Manual (Page 17)

– 17 –
6. MIDI LOCAL CONTROL ON/OFF
This function is used to control whether or not the sound from the piano will be heard when you
play the keyboard. When MIDI LOCAL CONTROL is set to on you will hear the piano when you
play. When MIDI LOCAL CONTROL is set to off you will not hear any sound from the piano
when you play but the piano's keyboard data will be transmitted through the MIDI jacks to an
external MIDI device.
(1) If you press any F-sharp key while holding down the TOUCH and TRANSPOSE buttons, the
MIDI LOCAL CONTROL will be set to “off”. If you press again any F-sharp key while holding
down the TOUCH and TRANSPOSE buttons, the MIDI LOCAL CONTROL returns to “on”.
(2) Release both hands after selecting the desired setting.
7. RESET
When the RESET procedure is used, most of the piano’s original factory settings (the same setting
as when you turn on the instrument) will be restored.
The original factory settings restored with this function are:
– MIDI Transmit Channel 1
– Transmit MIDI Program Change On
– Multi-timbral Mode Off
– MIDI Local Control On
– Tuning +/-0
– Touch Type (When the TOUCH LED is on) LIGHT
– Tempo (Metronome of the Recorder) 120/min.
(1) Press any B-key while holding down the TOUCH and TRANSPOSE buttons.
(2) Release both hands after following this procedure.