Kawai DP100 - Manual (Page 10)

– 10 –
GETTING STARTED
1. BASIC OPERATIONS
(1) Turn on the power.
(2) Adjust the volume.
Play a note on the keyboard and adjust the volume (Moving the slider to the right raises the volume
while moving to the left lowers it.)
(3) Choose a tone.
Pressing a TONE button automatically changes the sound made by the piano. The LED above the
selected tone button will light to indicate which tone is currently in being used.
(4) Play.
Experiment by playing the different tones.
(5) Dual
With DUAL mode you can layer two sounds together. To layer two sounds, press the TONE
buttons for both sounds simultaneously.
(6) Reverb
REVERB adds reverberation to the sound simulating the acoustic enviroment of a recital room,
stage, or concert hall.
There are three types of Reverb in the DP100. They are Room, Stage and Hall. To change the
Reverb type, press one of the following TONE buttons while holding down the REVERB button.
CLASSIC GRAND Room
MODERN PIANO Stage
E.PIANO Hall
The Reverb is “ON” when the LED above the REVERB button is lit.
Pressing the REVERB button once again turns the Reverb “OFF”.
When the power is turned on, the REVERB function is automatically activated.
NOTE:
1. The piano can play up to 32 notes simultaneously (32-note polyphonic).
2. When playing in DUAL mode, the DP100 can play up to 16 notes simultaneously (16-note
polyphonic).