Kawai DP100 - Manual (Page 11)

– 11 –
2. TRANSPOSE
(1) Press the TRANSPOSE button and the LED above
it will be lit. The LED above the current key button
(TONE button) will also be lit. If the key of “C” is
selected the TRANSPOSE button will not light. (When
power is first turned “on”, the key is set to C.) When
any key other than “C” is selected the TRANSPOSE
LED will light.
(2) While holding down the TRANSPOSE button, press
the key button (TONE button) for the key you would
like to transpose to. To select a key with a “sharp” or
“flat”, simultaneously press the buttons on either side
of that key. For example, simultaneously pressing the
“D” and “E” buttons selects “E-flat”.
E-flat
(3) To turn off the TRANSPOSE function, press the TRANSPOSE button again. The TRANSPOSE
LED will go off and the key of the piano will return to C. Whenever the TRANSPOSE LED is on
the piano will be transposed to your desired key.
3. TOUCH RESPONSE
When playing a piano, the volume of the sound produced increases in direct relation to how hard a
key is struck. The piano offers the realistic feel of an acoustic piano for practicing music. The
Touch Response function simulates the standard touch of an acoustic piano when the TOUCH LED
is off. When the TOUCH LED is lit, you can select other Touch Types. (Refer to the
PROGRAMMING MODE section of this manual.)
4. DEMONSTRATION SONG
The piano has 7 built in demonstration songs for your listening enjoyment.
(1) Press the DEMO button and the demo for CLASSIC GRAND will start. When the CLASSIC
GRAND demo is finished the piano will play all the other demos one at a time in random order.
(2) If you would like to listen to the demo for a particular sound, just press the desired TONE button
while the demo is playing. When you press the TONE button, the demo for that newly selected
sound will be played.
(3) To stop the demo, press the DEMO button again at any time.
KEY
C D E F G A B