Kenwood KDC-4051UM - Manual (Page 8)

8
Changing the frequency steps (KDC-U449/ KDC-U3049/ KDC-U349 only)
You can change the frequency step of FM/ MW:
FM : 50 kHz to 200 kHz
MW : 9 kHz to 10 kHz
1 Press and hold SRC to turn off the power.
2 While pressing number buttons 1 and 5 (MEMO MY LIST), press SRC.
Release your fingers from the buttons after the display appears.
To restore the initial setting, repeat the same procedure.
When the frequency step is changed, the frequencies in the memory are deleted.
Adjust [SETTINGS] mode settings
While listening to the radio...
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4 Hold
to finish the procedure.
Item Selectable setting (Preset: *)
LOCAL SEEK ON: Searches only stations with good reception (KDC-U449/ KDC-U3049/ KDC-U349: MW/ SW1/ SW2
stations only ; KDC-4051UM: FM stations only). ; OFF *: Cancels.
SEEK MODE Selects the tuning mode for
4 / ¢ buttons.
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
AUTO
MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing
is not activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 7)
MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).
PTY SEARCH Selects the available Program Type (page 9). Then, press
4 / ¢ to start searching.
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
(ENGLISH */ FRENCH/ GERMAN), then press to confirm.
NEWS SET 00M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels.
AF SET ON *: Automatically searches for another station broadcasting the same program in the same Radio Data
System network with better reception when the current reception is poor. ; OFF:
Cancels.
RDS REG ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.
ATP SEEK ON *: Automatically searches for a station with better reception when the traffic information's reception is
poor. ; OFF: Cancels.
[PTY SEARCH/ NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK] is selectable only for
KDC-4051UM.
[PTY SEARCH] is selectable only when the source is “FM.”
[NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ ATP SEEK] is selectable only when the source is “FM.” If other playback
source is selected, these settings are selectable under [RDS SET] item. (page 14)
EN02-19_KDC-U449[M]f.indd 8 EN02-19_KDC-U449[M]f.indd 8 9/20/10 2:25:50 PM 9/20/10 2:25:50 PM