Kenwood KDC-D300 - Manual (Page 14)

Troubleshooting Guide
— 14 —
English
The following messages are displayed on the centre unit when certain problems are occurring in your system. Take
the recommended actions.
No CD in the unit.
Insert the CD.
]
E-01
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
Clean the CD and load it correctly.
]
E-04
The unit is malfunctioning for some reason.
Press the reset button on the centre unit. If the "E- 99" code does not disappear, consult your nearest service centre. ]
E-99
The protective circuit in the unit activates when the temperature inside the CD player exceeds 60°C (140°F), stopping all operation.
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
disc will start playing again.
]
E-0d
EJECT
HOLD
The faceplate of this unit has been removed.
Replace it.
]
NO PANEL
E-30