Front panel – Kustom WAV 210 User Manual
Page 6
DEL
REV
MOD
SAVE
4
1
2
3
GROUP
LEVEL
FAVORITES
DIGITAL EFFECTS
PUSH ON
CHANNEL SELECT
HIGH
VOLUME
MID
LOW
GAIN
GUITAR
INPUT
VOLUME
HIGH
MID
LOW
PREAMP
BOOST ON
SHIFT
TUBE DRIVEN LEAD CHANNEL
RHYTHM CHANNEL
CLEAN
wAv
CLASSIC
CRUNCH
1
2
4
3
5
6
7 8
9
10
11
12
13
14
15
16
18
17
20
19
22
21
23 24
Front Panel
Guitar Input Jack:
Lead Channel Gain:
Preamp Selector:
Low:
Channel Select switch
T
A
T
Indicates Lead channel is active.
:
Lead Channel
Lead Channel
Lead Channel Mid:
Lead Channel High:
Lead Channel Boost switch:
Lead Channel LED:
Lead Channel Master Volume:
Rhythm Channel Low:
Rhythm Channel Mid:
Rhythm Channel Shift switch:
Rhythm Channel High:
Rhythm Channel LED:
Rhythm Channel Master Volume:
Save Button:
his 4-way switch selects which preamp you are
using. Rotating it will switch between the uniquely
voiced Clean, Classic, Crunch, and
sounds.
A warm and balanced tone with a light
overdrive
Controls the
Gives a 6 dB boost to the current lead channel
setting and
This option is
perfect for bringing you above the mix when
taking a solo.
Selects Lead or Rhythm channel and Lead or
Rhythm preset stored in selected Favorites Bank.
!
!
!
!
Clean-
Classic-
Crunch-
wAv-
Vintage-style tube gain with an edgy
British character.
High gain with a cutting midrange.
Modern, extreme high gain.
Controls the
Controls the
selects the Boost preset that is stored in
the selected favorites bank. It works with or
without the footswitch connected.
Controls the
Controls the
When engaged, this switch will boost the bass
response of the rhythm channel and give you a
fuller, rounder tone.
Controls the
Indicates Rhythm channel is active.
Controls the overall output of the amplifier when
the Rhythm channel is selected.
This button saves any changes that were made to
the Favorites. Whenever a favorite has been edited,
the button pad will blink to indicate edit mode.
Now you have the choice of storing the change by
pressing Save, or just use the change temporarily
by not permanently altering your last saved setting.
Controls the overall output of the amplifier when the
lead channel is selected.
his is a 1/4" 2- conductor input jack for plugging
in your instrument. It is intended for guitars but
will accept other instruments as well
djust clockwise to increase the amount of
distortion. Used in the lower ranges of the control,
you get a less distorted sound, a "bluesy" tone. As
you increase the gain, you add tremendous
amounts of distortion to the signal for a harder
edged "crunch" tone.
selected passive tone stack’s low
frequencies when Lead Channel is selected.
selected passive tone stack’s mid
frequencies when Lead Channel is selected.
selected passive tone stack’s high
frequencies when Lead Channel is selected.
passive tone stack’s low frequencies
when Rhythm Channel is selected.
passive tone stack’s Mid frequencies
when Rhythm Channel is selected.
passive tone stack’s high frequencies
when Rhythm Channel is selected.
.
WAV
®
6