Konica Minolta DiMAGE Xt - Manual (Page 73)

73
The copy-unsuccessful message will appear when one or all of the images could not be copied.
Check the memory card to see which files were copied and then repeat the procedure for the
uncopied images.
Camera Notes
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL stan-
dards. The video-output setting can be checked and set in the custom 2 section of the setup menu
(p. 74).
1. Turn off the television and the camera.
2. Slide the AV-out terminal / USB-port cover open. Insert the
small plug of the AV cable into the camera.
3. Plug the other end of the AV cable into the video and audio
input terminals on the television. The yellow plug is for the video
output. The white plug is for the monaural audio output.
4. Turn the television on.
5. Change the television to the video channel.
6. Turn the camera’s mode dial to the playback position. The cam-
era’s monitors will not activate when the camera is attached to
a television. The playback-mode display will be visible on the
television screen.
7. View images as described in the playback section.
2
3