Kenwood KDC-9017 - Manual (Page 42)

• 4/¢ buttons
Press the 4 button to search through the tracks backward.
Press the ¢ button to search through the tracks forward.
Use to move the cursor while entering disc name.
• DISC buttons (for disc changers)
Press the DISC
–
button to search through the discs backward.
Press the DISC
+
button to search through the discs forward.
Select numbers and symbols while entering disc name.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
• OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
• DNPP button (for disc changers)
Enters and cancels the Disc Name Preset Play mode.
• Number/letter entry buttons (KDC-X917/X817/X717 only)
Used to specify the track (disc) number used in direct track
(disc) searches.
Use to enter letters during disc name preset.
CD/External disc control features
Basic Operations of remote
— 42 —
English
KDC-X917(K)_U.S_r3 00.12.26 1:12 PM Page 42